Eco Friendly HVAC

Taking Care Of Business

Aqua Wells has proudly been serving the Ozarks since 2000.

Geo-Thermal

Call Today for FREE ESTIMATES on Geo-Thermal Wells and Water Wells 417-753-1975

 

 

Vertical Loop
Vertical_Loop
This loop is used mainly when land area is limited and in retrofit applications of existing homes. A drill rig is used to bore holes at of depth of 150 to 200 feet. A U-shaped coil of high density pipe is inserted into the bore hole. The hole is then backfilled with a sealing solution.
Horizontal Loop
Horizontal_Loop
This is the most common loop used when adequate land area is available. Loop installers use excavation equipment such as chain trenchers, backhoes and track hoes to dig trenches approximatly 6-8 feet deep. Trench lengths rannge from 100 to 300 feet, depending on the loop desigh and application.
Pond Loop
Pond_Loop
A pond loop is an option if a large body of water is available within approximately 200 feet of the home. The system uses coils of pipe typically 300 to 500 feet in length. The coils are placed in and anchored at the bottom of water.
Open Loop
Open_Loop
This system can be installed if an abundant supply of high quality well water is available. A typical home will require 4 to 8 gallons of water per minute. A proper discharge area such as a river, drainage ditch, field tile, stream, pond or lake must be present. Check your local codes for restrictions before selecting a specific discharge method.

Copyright Aqua Wells Inc 2013 | All rights reserved